1. The pump is driven directly by the sunlight. So it will work continuously only when the sunlight is enough. As the power of the solar panel is depended on the sunlight, the pump is also affected by weather, seasons, places, etc.
2. Don’t make the pump work without water for a long time, or its lifespan will be shortened.
3. Don’t put the solar panel and the control box in water, or it will be damaged.
4. Clean the pump regularly.
5. The solar panel is made up of glass and metal. You must be careful when using it. And don’t let children play with it.
6. The moment that the pump starts to work, its spray height will be higher than the normal range and it will return to normal after 3-5 seconds.
Method of Operation:
1. Assemble the product according to the sketch map of the instruction. Then set it on the places where the solar panel is not sheltered from the sun.
2. Turn on the switch, the pump will work normally as soon as the sunshine is enough.
3. There is some air in the pump at the moment when it is put in the water. You’d better not concentrate the spray head to the pump until it sprays normally.
Solar Panel: Mono-crystalline 17V / 10W
Maximum Water Height: 2m / 6.6ft
Brushless Pump Input: DC 6-24V
Maximum Quantity of Flow: 1350L/H
Maximum Lift Head: 8m / 26.2ft
Solar Panel Size: Approx. 340 * 260 * 18mm / 13.4 * 10.2 * 7.1in
Item Weight: Approx. 1346.7g / 47.5oz
1 * Solar Panel
1 * Brushless Water Pump with Power Wire
6 * Water Outlet Caps
10 * Accessories
4 * Sleeve Anchor
8 * Screw
8 * Nut
1 * User Manual
- Solar panels directly drive the fountain in the sun.
- Brushless DC water pump, pump water easily.
- The solar pump will start automatically in 3 seconds when bright sunlight shines on the solar panel directly without any shadow.
- Low carbon, environmental friendly and save water.
- 6 Different water outlet caps.